Manual de instrucciones DAXTEN SCOUT MINI BROCHURE

[. . . ] SCOUT mini Manual del Usuario y Guía de Instalación Dakota Computer Solutions, S. L. C/ Francisco de Vitoria, 19 50008 Zaragoza España www. dakota. eu. com Página 2 de 21 Scout mini - Manual Rev. 1. 0 Garantía Dakota Computer Solutions warrants the Scout Mini KVM SwitchTM to be in good working order for one year from the date of purchase from Dakota Computer Solutions or an authorized dealer. In addition, all products can be returned within 30 days from the date of purchase from Dakota Computer Solutions. If the customer is not satisfied with the product for any reason, he has the right to return it and Dakota Computer Solutions will reimburse the buying price (excluding the freight costs). [. . . ] The rate is the speed at which the keys are sent in keys/second. The delay is the wait time in milliseconds after the key is initially pressed, before additional keystrokes are sent. To issue the command press and release the left Control key, then type A, then enter the 1-3 digit decimal typematic value followed by <Enter>. The typematic value is defined as shown below. The typematic value to be used is determined from the following tables using the equation: Typematic Value = Rate value + Delay Value. (32 choices) and delay in milliseconds (4 choices) from the tables below. Add the values to the right of the desired settings. For example to use a Rate of 16. 0 keys/sec. and a 500 millisecond delay, the typematic value = 7 + 32 = 39, so to set this value, type <Ctrl> A 39 <Enter>. Rate Rate Rate Keys/sec Value Keys/sec 15. 0 8 7. 5 13. 3 9 6. 7 12. 0 10 6. 0 10. 9 11 5. 5 10. 0 12 5. 0 9. 2 13 4. 6 8. 6 14 4. 3 8. 0 15 4. 0 Rate Keys/sec 30. 0 26. 7 24. 0 21. 8 20. 0 18. 5 17. 1 16. 0 Rate Value 0 1 2 3 4 5 6 7 Rate Value 16 17 18 19 20 21 22 23 Rate Keys/sec 3. 7 3. 3 3. 0 2. 7 2. 5 2. 3 2. 1 2. 0 Rate Value 24 25 26 27 28 29 30 31 Delay in millisec. Typematic delay Delay in Delay Delay in Delay millisec. value 500 32 750 64 Delay in millisec. 1000 Delay value 96 Page 12 of 21 Scout mini - Manual Rev. 1. 0 PS/2 to serial mouse translation, wheel mouse You can use some computers with PS/2 mouse interfaces and some computers with serial interfaces. You must issue this command on each computer that is serial. You must switch to each computer and issue the command. To configure a computer for a serial mouse, press and release the left Control Key, type Q1, and press <Enter>. Follow with the Keep command to save the new setting in the unit's non-volatile memory. To restore a computer that was previously set to serial to regular PS/2, use Q0 instead of Q1. Whether a computer uses a PS/2 wheel mouse or a regular PS/2 mouse is learned by Scout mini when the computer loads its mouse driver. This will override any previous setting. You can tell Scout mini to change its PS/2 communication to regular or wheel with the Q command. You can also save it to non-volatile memory. [. . . ] See page 13. 2. 3. 4. 5. d. Incompatible or old mouse driver being used, try latest driver. At time of this publishing Microsoft 9. 01 driver is best one available. Cabling was disturbed during mouse movement. [. . . ]