Manual de instrucciones LG LRNU24GS3R0

[. . . ] N Never spill any kind of liquid on the air conditioner. If this happens, unplug or turn off the air conditioner and contact an authorized service center. N Do not insert anything between the airflow blades to prevent damage of the inner fan and consequent injury. Keep children away from the air conditioner. [. . . ] Result: N Each time you press the button: - The temperature is adjusted by 1°C - The indoor unit beeps N If the room temperature is higher than the selected temperature, the air conditioner starts cooling. N If the room temperature reaches the set temperature, the air conditioner stops cooling, but the fan operates consistently. 4 Press the is displayed. button to select the fan speed until the required setting Automatic (rotated : Low Medium High Turbo (Maximum) ) Result: Each time you press the beeps. button, the indoor unit 5 To control the airflow direction, refer to page 15. E-10 AST18WJWB IB_E_20219 11/8/04 6:14 PM Page 11 Selecting the Dry Mode ENGLISH You can select the Dry mode if you want to dehumidify your room. You can adjust the temperature in this mode. 1 If necessary, press the Result: button. N The operation indicator on the indoor unit lights up. N The air conditioner starts up in Cool mode with Turbo fan speed. N The indoor unit beeps. 2 Press the Result: button on the remote control until is displayed. button. N The indoor unit beeps each time you press the N The air conditioner runs in the Dry mode. Note You can change modes at any time. 3 Press the button to adjust the temperature until the required temperature is displayed. You can set the temperature between 16°C and 30°C. Result: N Each time you press the button: - The temperature is adjusted by 1°C - The indoor unit beeps N The air conditioner starts dehumidifying and the fan speed is adjusted automatically. 4 To control the airflow direction, refer to page 15. E-11 AST18WJWB IB_E_20219 11/8/04 6:14 PM Page 12 Selecting the Fan Mode You can select the Fan mode if you want to ventilate your room. It helps to refresh the air in your room. You can adjust the fan speed in this mode. 1 Press the Result: button until the required direction is set. The outer blade is adjusted vertically. 2 Press the button to move the blade up and down automatically during operation. 3 Press the Note button again to stop the blade moving up and down. set to the default position. Adjusting the Airflow Direction Horizontally You can adjust the airflow direction horizontally with your hands. The inner blades with small fins moves the air to the required direction. 1 Adjust the inner blades by moving them to left or right. E-15 AST18WJWB IB_E_20219 11/8/04 6:14 PM Page 16 Setting the On Timer You can set the On Timer to turn on the air conditioner automatically at the appointed time. You can set the time from 1 hour to 24 hours. 1 Press the button until the required time is displayed to set the On Timer. The air conditioner stops operating 6 hours after you set the Sleep Timer. 1 Press the Result: button until the indicator appears on the remote control. N The indoor unit beeps. N The air conditioner will be controlled as indicated in the illustrations below. You can set Sleep Timer only in the Cool mode. Note Cooling The temperature is increased by 1°C every hour. [. . . ] The air conditioner changes the Cool mode automatically depending on the current temperature during operation. 2 To turn the air conditioner off, press the On/Off button again. Note Even if you turned the air conditioner on with the On/Off button, you can control it with the remote control. E-21 AST18WJWB IB_E_20219 11/8/04 6:14 PM Page 22 Troubleshooting Guide Before contacting the service center, check the following. It will save your time and the expense of an unnecessary call. Problem The air conditioner does not operate. [. . . ]