Manual de instrucciones HAUPPAGE WINTV-PVR-USB2 MCKIT QI

[. . . ] After Windows is running, plug the supplied Power Supply into WinTV-PVR-USB2's power input to install the driver. Install the Media Center remote control. Begin setting up Media Center. Hauppauge Computer Works, Ltd. [. . . ] This may not be necessary if your TV aerial supplies FM, or if you do not want to listen to radio with Media Center. FM Radio Connector input Left/Right audio input Tech Support: (+65) 276 4412 Telephone: (+65) 276 9163 Fax: (+65) 276 9167 TV Aerial connector (preferably connect to a rooftop aerial) S-Video input Included with the WinTV-PVR-USB2 MC-Kit 2. Install the WinTV Media Center driver Start your computer and wait for Windows Vista to fully boot. PIug the supplied Power Supply into the Power Supply input on WinTVPVR-USB2. Cancel any 'Found new hardware wizards' you may see. Insert your WinTV Installation CD-ROM and click on Start then 'Computer', you should then see the HCW CD under 'Devices with removeable media', double click on this CD-ROM then double click on the file called 'HCWDriverInstall'. You will then be presented with a blue screen which will begin installing and updating the drivers for your product. The WinTV-PVR-USB2 device, with analogue TV tuner, FM radio and hardware MPEG encoder The Wall mounted power supply 6V/1. 5A Media Center Remote control transmitter and two AA batteries Media Center remote control receiver box for USB IR transmitter cable WinTV-PVR MC Driver Installation CD-ROM WinTV for Media Center Quick Installation Guide (this guide) N ote: The enclosed WinTV Installation CD-ROM also include WinTV applications. You won't need them to use Microsoft Media Center application. Page 1 Page 2 Once complete, click the bar to exit. Troubleshooting Removing the WinTV Media Center driver If you ever need to remove the WinTV driver, run HCWClear. EXE from the WinTV Installation CD-ROM. On Vista you must run HCWClear. EXE as Administrator. 3a. Install the Media Center Remote control receiver The Media Center remote control receiver box is a small USB device which receives remote control commands. To install the Media Center remoStart button te control receiver, simply plug it into any USB port on your Media Center PC, Windows Vista will then automatically install the drivers for the USB receiver. Insert now the 2 AA batteries into the Media Center Remote control transmitter. To test the receiver, click the Start button in the middle of the remote control. Media Center should open. Media Center remote control receiver box If you cannot find the Radio button in Media Center Due to limitations of Media Center the FM radio option will only appear if you have configured your device to receive the basic analogue channels. If you wish to get the FM radio working through other means please see our forum or contact support for further assistance with this. FCC Statement Radio Interference Statement: WinTV have been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] You will then be guided through a wizard to set up the type of signal you wish Media Center to receive. Follow the on screen instructions for information on what to do from here. Waste Electrical and Electronic Equipment (WEEE) The device may not be disposed of with household rubbish. This appliance is labeled in accordance with European Directive 2002/96/EG concerning used electrical and electronic appliances (Waste Electrical and Electronic Equipment - WEEE). [. . . ]