Manual de instrucciones PANASONIC TC21S4RL

[. . . ] – Sit down with the camera in your trousers pocket or forcefully insert it into a full or tight bag, etc. – Attach any items such as accessories to the strap attached to the camera. – Press hard on the lens or the LCD monitor. This camera is not dust/splash/water proof. Avoid using the camera in places with a lot of dust, water, sand, etc. [. . . ] Yellow: When the shutter button is pressed halfway, the frame turns green when the camera is focused. White: Displayed when more than one face is detected. Other faces that are the same distance away as the faces within the yellow AF areas are also brought into focus. Note • Under certain picture-taking conditions including the following cases, the face detection function may fail to work, making it impossible to detect faces. [AF Mode] is switched to [ ([Ø] while motion pictures are taken). – When the face is not facing the camera – When the face is at an angle – When the face is extremely bright or dark – When there is little contrast on the faces – When the facial features are hidden behind sunglasses, etc. – When the face appears small on the screen – When there is rapid movement – When the subject is not a human being – When the camera is shaking – When Digital Zoom is used • If the camera is registering something other than someone’s face, change the settings to something other than [š]. ] ∫ Setting up [ ] ([AF Tracking]) Align the subject with the AF tracking frame, and then press 4 to lock onto the subject. A AF tracking frame • AF area will be displayed in yellow when a subject is recognised, and focus will automatically adjust continuously following the subject’s movement (Dynamic tracking). • AF tracking is cancelled when 4 is pressed again. A Note • Dynamic tracking function may not work in the following cases: – When the subject is too small – When the recording location is too dark or bright – When the subject is moving too fast – When the background has the same or similar colour to the subject – When jitter is occurring – When using the zoom • When the lock fails, the AF tracking frame will turn red and then disappear. • The camera records pictures with [AF Mode] as [Ø] when locked or Dynamic Tracking is not working. - 80 - Recording [Quick AF] Applicable modes: As long as the camera is held steady, the camera will automatically adjust the focus and focus adjustment will then be quicker when the shutter is pressed. This is useful when you do not want to miss a picture-taking opportunity. Settings: [ON]/[OFF] Note • The battery will be consumed faster than usual. • Number of recordable pictures will be fixed to 5 pictures when the self-timer is used. • The flash setting is fixed to [‰ ]. — [OFF] ¢ This can be set only when Intelligent Auto Mode is set. Note • When [ ] or [ ] is set, focus prediction will be performed in a possible range to prioritise the burst speed. Therefore, if you try to take a picture of a subject that is moving fast, it may have trouble with focusing or it may take time to focus. • When [ 10 ] is set, the recording may be brighter or darker from the second picture depending on changes in the brightness of the subject. • The burst speed (pictures/second) may become slower depending on the recording environment such as in dark places, if the ISO sensitivity is high, etc. • If you take pictures in Burst Mode with the built-in memory, it will take time to write the picture data. • Burst Mode is not cancelled when the camera is switched off. • You cannot use Burst Mode in following conditions. – When using Auto Bracket – In [Panorama Shot], [Handheld Night Shot] and [Photo Frame] in Scene Mode • Number of recordable pictures will be fixed to 3 pictures when the self-timer is used (except for [ ]). • The flash setting is fixed to [Œ] (except for [ ]). - 83 - Recording [Color Mode] Applicable modes: Sets various colour effects, including making the picture sharper, brighter, or applying a sepia tone. Settings [STANDARD] [Happy]¢1 [VIVID]¢2 [B&W] [SEPIA] Description of settings This is the standard setting. [. . . ] This is not a malfunction. The clock is reset. • If you do not use the camera for a long time, the clock may be reset. > [Please set the clock] message will be displayed; please reset the clock. (P18) When pictures are taken using the zoom, they are slightly distorted and the areas around the subject contain colours which are not actually present. • It is possible that the subject may be warped slightly, or the borders get coloured, depending on the zoom magnification, due to the characteristics of the lens, but this is not a malfunction. Zooming stops instantaneously. [. . . ]