Manual de instrucciones SHARP AR-M355N

[. . . ] MODEL AR-M355N AR-M455N LASER PRINTER OPERATION MANUAL (for general information and copier operation) Page PART 1: GENERAL INFORMATION ?PERIPHERAL DEVICES PART 2: COPIER OPERATION 1-1 2-1 3-1 4-1 5-1 6-1 7-1 8-1 ?SPECIFICATIONS Be sure to become thoroughly familiar with this manual to gain the maximum benefit from the product. Before installing this product, be sure to read the installation requirements and cautions sections. [. . . ] the [OK] 7 In Windows 95/98/Me/NT 4. 0, clickWindows button in the print window. In (2) To select the paper type, select [Paper Type] in [Paper Selection] and then select the desired paper type from the list. Example: Selecting recycled paper 2000/XP/Server 2003, click the [Print] button. (3) To select the output tray installed on the duplex module, set [Output] to [Left side tray]. 1-7 CHAPTER 2 SETTING THE PRINTER DRIVER PROPERTIES This chapter explains how to configure settings in the printer driver. The settings are changed in the software application. Page SELECTING PRINTING FUNCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 G Settings in the [Main] tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 G Settings in the [Paper] tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 G Settings in the [Advanced] tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 G Settings in the [Job Handling] tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12 G Settings in the [Watermarks] tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15 2-1 SELECTING PRINTING FUNCTIONS Almost all print functions are selected in the print driver properties window that appears when printing from an application. The print functions can also be selected in the printer driver properties window that appears when [Properties] is selected in the printer icon menu. The printer driver settings are grouped on tabs in the printer driver properties window. The procedure for selecting settings after opening the printer driver properties from an application is explained in this section. (The windows that are shown are the AR-M455N PCL6 printer driver in Windows Me. ) The following optional peripheral devices are installed in the printer driver windows: B/W scanner module/DSPF + Saddle stitch finisher + Mail-bin stacker + Punch module + Duplex module Settings in the [Main] tab The following window appears when the [Main] tab is clicked. The settings and buttons are explained below. Click this button to return all settings to the factory default settings. This button appears on all tabs. (1) (2) (3) (1) Copies Set the number of copies. Default setting: 1 (2) Collate Select this checkbox to collate the copies. When the staple function or punch function is turned on, a checkmark automatically appears in the checkbox. Default setting: Selected (3) Document Style Select one-sided or two-sided printing. [1-Sided]. . . . . . . . . . . . . . . . . . . Print on one side of the paper. [2-Sided (Book)] . . . . . . . Print on both sides of the paper and bind at the side. [2-Sided (Tablet)] . . . . . Print on both sides of the paper and bind at the top. *1 . . . . . Print on both sides of the [Pamphlet Style] paper and bind down the middle. Default setting: 1-Sided *1 Four selections are available for the pamphlet format. [Tiled Pamphlet] Print on paper double the size of the document size selected in the application. The page order will be rearranged as required for the middle binding format. [2-Up Pamphlet] The document size selected in the application will be reduced in the same way as in 2-Up printing, and printing will take place using the selected paper size. [Multiple Tiled Pamphlet] When using the pamphlet function, printing takes place on paper that is twice the size of the paper specified in the application. [. . . ] 3-4 -Job build mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10 -Memory box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15 to 3-16 -Own number sending. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11 -Polling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]