Manual de instrucciones SONY XS-GF1621X

[. . . ] 3-262-049-31 (1) Specifications Speaker Coaxial 2-way: Woofer 16 cm, HOP, cone type Tweeter 4 cm, Al, cone type 170 W 40 W 4 ohms 90 dB/W/m 35 ­ 22, 000 Hz Approx. [. . . ] Keep the following in mind when choosing a mounting location: ·Make sure that nothing is obstructing around the mounting location of the door (front or rear) where you are to mount the speaker. ·A hole for mounting may already be cut out of the inner panel of the door (front or rear). In this case, you need to modify the board only. ·If you are to mount this speaker system in the door (front or rear), make sure that the speaker terminals, frame or magnet do not interfere with any inner parts, such as the window mechanism in the door (when you open or close the window), etc. Also make sure that the speaker grille does not touch any inner fittings, such as the window cranks, door handles, arm rests, door pockets, lamps or seats etc. Mounting from the car interior Montaje desde el interior del automóvil 1 Mark the 4 bolt holes and make them 3. 3 mm* in diameter. Marque los orificios de los 4 pernos y hágalos de 3, 3 mm* de diámetro. * * When using 4: ø 5 mm * Cuando utilice 4 : 5 mm de diámetro * 4 ø 1 Door panel Panel de la puerta ø 126 mm Antes del montaje Para montar el altavoz de modo que quede empotrado en la ubicación de montaje se requiere una profundidad mínima de 43 mm. Mida la profundidad del área donde desee montar el altavoz y asegúrese de que no obstruya ningún otro componente del automóvil. [. . . ] Presione e inserte los extremos de la red de la rejilla. 1 m m mm 13 6 6 5 5 How to remove the grille net Cómo extraer la red de la rejilla [. . . ]