Manual de instrucciones TRENDNET TEW-687GA QUICK INSTALLATION GUIDE

[. . . ] Then click on Obtain an IP address automatically. Windows Vista 1. Go into the Control Panel, click Network and Internet, click Network and Sharing Center, click Manage Network Connections and then right-click the Local Area Connection icon and then click Properties. 2. Click Internet Protocol Version 4(TCP/IPv4) and then click Properties. Then click on Obtain an IP address automatically. 11 Windows XP/2000 1. [. . . ] To reset the TEW-687GA, take a pin or paper clip and press the reset button for 15 seconds, then let go. The reset button is located on the bottom of the TEW-687GA. Then type http://TEW-687GA. trendnet or http://192. 168. 10. 110 into your browser and re-connect to your wireless network following section 3 or connect using WPS by following section 4. I followed the Quick Installation Guide and setup a new password. When I log in to the browser configuration an access error message appears. The default user name and password is admin. When you log in to the browser configuration for the first time, make sure to enter admin for user name and password. If the password was changed and you don't remember it, you need to reset the TEW-687GA. To reset the TEW-687GA, power up the unit and wait 30 seconds for the unit to boot up. Then take a pin or paper clip and press the reset button for 15 seconds, then let go. The reset button is located on the bottom of the TEW-687GA. Please note that performing a reset on the TEW-687GA will erase all settings applied and will revert back to default settings. You will need to reconfigure the TEW-687GA, type http://TEW-687GA. trendnet or http://192. 168. 10. 110 into your browser and re-connect to your wireless network following section 3 or connect using WPS by following section 4. Do I need a gaming console in order to use this device?The TEW-687GA is compatible with any Ethernet-enabled device. If you still encounter problems or have any questions regarding the TEW-687GA, please contact TRENDnet's Technical Support Department. 13 Wireless Tips The following are some general wireless tips to help minimize the impact of interference within an environment. Assign your network a unique SSID Do not use anything that would be identifying like "Smith Family Network". Choose something that you would easily identify when searching for available wireless networks. Do not turn off the SSID broadcast The SSID broadcast is intended to be on and turning it off can cause connectivity issues. The preferred method of securing a wireless network is to choose a strong form of encryption with a strong and varied encryption key. Note: after setting up the SSID, encryption type and encryption key/passphrase, please make a note of them for future reference. You will need this information to connect your wireless computers to the wireless router/access point. [. . . ] Use the wireless adapter's site survey tool to determine the best antenna orientation for your wireless devices. Interference from devices that produce RF (radio frequency) noise can also impact your signal. Position your wireless devices away from anything that generates RF noise, such as microwaves, HAM radios, Walkie-Talkies and baby monitors. Any device operating on the 2. 4GHz frequency will cause interference. [. . . ]