Manual de instrucciones TRENDNET TV-IP121W QUICK INSTALLATION GUIDE

[. . . ] Quick Installation Guide TV-IP121W H/W: A1 Table of Contents Table of Contents Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Antes de iniciar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Instalación del Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configuración de la cámara de Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Q2: I do not have a DHCP server or DHCP is disabled on my network and I am unable to configure the TV-IP121W. A2: First, go to the TCP/IP settings on your computer and assign a static IP address on your computer's network adapter in the subnet of 192. 168. 10. x. Since the default IP address of the TV-IP121W is 192. 168. 10. 30, do not assign a static IP address of 192. 168. 10. 30 on your computer's network adapter. Second, run the IPSetup wizard and double click on the TVIP121W to access the browser configuration. How can I adjust the focus on the Internet camera?A3: You can adjust the Internet Camera's focus by rotating the lens. Q4: When I click on Live View the image does not load?A4: First, make sure that you are using a browser that supports ActiveX. Second, make sure that you have added the ActiveX component. See step 10 and 11 in Section 2: Configure the Internet Camera. Q5: How do I connect the TV-IP121W to my wireless router or access point?A5: Make sure that you configure the camera to have the same SSID, encryption mode and key (if enabled). Follow the instructions in Section 2: Configure the Internet Camera to configure the camera with the SSID and encryption key. Q6: :After I successfully configured the TV-IP121W to match my wireless network settings, I can not connect to the camera. A6: First, verify that the wireless settings match your wireless network settings. Second, verify in the wireless section of the browser configuration that the Enable option is checked. Third, make sure to disconnect the Ethernet cable from the camera and verify that the LINK LED is blinking green. A7: Take a pin or paperclip and press the reset button on the back of the unit for 15 seconds. This will return settings back to factory defaults. The default IP address is 192. 168. 10. 30. The default administrator ID and password is admin. If you still encounter problems or have any questions regarding the TV-IP121W, please contact TRENDnet's Technical Support Department. 9 This TRENDnet product includes free software written by third party developers. [. . . ] 20675 Manhattan Place, Torrance, CA 90501 -U. S. A -, Tel. : +1-310-961-5500, Fax: +1-310-961-5511 die Software anfordern. Información general sobre la GPL/LGPL Este producto de TRENDnet incluye un programa gratuito desarrollado por terceros. Estos códigos están sujetos a la Licencia pública general de GNU ("GPL") o la Licencia pública general limitada de GNU ("LGPL"). Estos códigos son distribuidos SIN GARANTÍA y están sujetos a las leyes de propiedad intelectual de sus desarrolladores. [. . . ]