Manual de instrucciones TRENDNET TV-VS1P QUICK INSTALLATION GUIDE

[. . . ] Introduzca el CD-ROM de la herramienta en la unidad de CD-ROM de su PC. 2. Haga clic en Run autorun. exe (sólo para Windows 7/Vista). 3. Siga las instrucciones del Installation Wizard (Asistente de Instalación) 5. Una vez que la instalación completa, haga clic en Cerrar. 6. [. . . ] Disable any software firewall programs such as ZoneAlarm or Norton Internet Security. If you are using Windows 7, Vista or XP disable the built in firewall. Take a pin or paperclip and press the reset button on the side of the unit for 15 seconds. I do not have a DHCP server or DHCP is disabled on my network and I am unable to configure the TVVS1/TV-VS1P. Go to the TCP/IP settings on your computer and assign a static IP address on your computer's network adapter in the subnet of 192. 168. 10. x. Since the default IP address of the TV-VS1/TV-VS1P is 192. 168. 10. 30, do not assign a static IP address of 192. 168. 10. 30 on your computer's network adapter. Open Internet Explorer and enter http://192. 168. 10. 30 into the address bar. When I click on Live View the image does not load?Make sure that you are using a browser that supports ActiveX or Java. Make sure that ActiveX or Java is installed. See steps 10 to 12 in Section 2: Hardware Installation for ActiveX installation. Go to www. java. com to download and install the Java plug-in. Take a pin or paperclip and press the reset button on the side of the unit for 15 seconds. This will return settings back to factory defaults. Open up the IP Setup program to find out the IP address of the camera (see step 8 in Section 3: Configure the TV-VS1/TV-VS1P. ) If you do not have a DHCP server on your network, the default IP address is 192. 168. 10. 30. The default administrator ID and password is admin. Please give me an explanation of all the LEDs and Buttons. LED/Button Power LED Color Amber N/A Green Blinking N/A N/A Off N/A Sequence Solid Off Solid Network Port Link/ Act LEDs Definition Device is on Device is off LAN port connected at 10/20 Mbps or 100/200Mbps (Half/Full Duplex) LAN port data transmitting/receiving 10/20Mbps or 100/200Mbps (Half/Full Duplex) LAN port is disconnected/No Ethernet Link Hold 15 seconds to reset device to factory defaults. Reset Button If you still encounter problems or have any questions regarding the TV-VS1/TV-VS1P, please contact TRENDnet's Technical Support Department. 8 GPL/LGPL General Information This TRENDnet product includes free software written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. The details of the GNU GPL and LGPL are included in the product CD-ROM. [. . . ] TRENDnet no ofrece servicio técnico para estos códigos. Los detalles sobre las licencias GPL y LGPL de GNU se incluyen en el CD-ROM del producto. Consulte también el (http://www. gnu. org/licenses/gpl. txt) ó el (http://www. gnu. org/licenses/lgpl. txt) para ver las cláusulas específicas de cada licencia. Detailsemat infot GNU GPL ja LGPL kohta leiate toote CD-ROMil. [. . . ]